Stainless Steel Genebre 2026 Ball Valve with AVP Pneumatic Actuator
Air actuated ball valve - Genebre 2026 3 piece stainless steel butt weld ball valve fitted with AVP pneumatic actuators, built, configured and tested by actuation specialists All Valves Online
Butt weld Genebre 2026 3 piece stainless steel ball valves fitted with AVP pneumatic actuators, built and tested by actuation specialists All Valves Online
AVOL's Genebre 2026 3 piece stainless steel ball valve when fitted with the AVP pneumatic actuator produces a very reliable yet cost effective air actuated stainless steel ball valve. Designed for actuation with an integral ISO 5211 pad allowing the AVP actuator to direct mount to the valve, the resulting actuated valve assembly is compact. All air actuated valves shipped by All Valves Online are built in-house and 100% tested prior to shipping.
This version has butt weld end connections to suit Schedule 40 pipe.
AVP pneumatic actuators are sized with 6 bar air available at the actuator, if 6 bar air is not available please contact All Valves Online to check sizing.
- Stainless steel full port ball valve, 3 pieces
- Butt Weld ends according to ANSI B 16.25 Std.
- Made of stainless steel 1.4408 (CF8M).
- Ball seats PTFE + 15 % G.F.
- O’ring in the stem FKM (Viton).
- Stem gasket PTFE + 15 % Graphite.
- Blow-out proof stem.
- Max. Working pressure 63 bar
- Working Temperature -25 °C + 180 °C.
Either air open air close (double acting) or air open spring close (single acting) AVP pneumatic actuators can be fitted the the stainless steel ball valves, and a complete range of actuator position monitoring, feedback and control devices are available. These include limit switch boxes, namur pilot solenoid valves, valve positioners, air volume boosters and more, both for safe and hazardous area applications. Click here to review the AVOL pneumatic actuator accessories.