Air actuated Genebre 2118 stainless steel ball valve eith a AVP pneumatic actuator
Air actuated ball valves - Genebre 2118 PN16 Flanged wafer type stainless steel ball valves fitted with AVP pneumatic actuators, built and tested by actuation specialists All Valves Online
Genebre 2118 PN16 flanged wafer type stainless steel ball valves fitted with AVP pneumatic actuators, built and tested by actuation specialists All Valves Online.
AVOL's Genebre 2118 full bore wafer pattern stainless steel ball valve when fitted with the AVP pneumatic actuator produces a very reliable yet cost effective air actuated stainless steel ball valve. Designed for actuation with an integral ISO 5211 pad allowing the AVP actuator to direct mount to the valve, and with a wafer body that sandwich mounts between flanges produces an actuated valve assembly that is very compact.
This version has BS5404 PN16/40 flanged end connections up to 2", 2½" and above PN16
All air actuated valves shipped by All Valves Online are built in-house and 100% tested prior to shipping. AVP pneumatic actuators are sized with 6 bar air available at the actuator, if 6 bar air is not available please contact All Valves Online to check sizing.
- Full port ball valve, Wafer type.
- Assembly between flanges EN 1092 PN16.
- Made of stainless steel 1.4408 (CF8M).
- Ball seats PTFE + 15 % FG.
- O’ring in the stem FKM (Viton).
- Blow–out proof stem.
- Direct mounting actuator acc. to ISO 5211.
- Max. Working pressure 16 bar
- Working Temperature –20ºC + 180ºC
Either air open air close (double acting) or air open spring close (single acting) AVP pneumatic actuators can be fitted the the stainless steel ball valves, and a complete range of actuator position monitoring, feedback and control devices are available. These include limit switch boxes, namur pilot solenoid valves, valve positioners, air volume boosters and more, both for safe and hazardous area applications. Click here to review the AVOL pneumatic actuator accessories.