Hidroten Electric PVC Ball Valve | EPDM Seals | J+J J4CS Electric Actuator | On-Off 24-240V | BSP screwed ends

Hidroten electric ball valve assemblies, BSP PVC/EPDM, fitted with an on-off J+J electric actuator, built and tested from stock by the valve actuation specialists All Valves Online in the UK.

_________________________________________________________________________________

Well matched to PVC electric ball valves, the J+J electric actuator produces a light weight actuated valve assembly that typically requires no more pipe work support than the valve without the electrical actuator. 

Manufactured in the EU by Hidroten, these 2 way PVC electrical ball valves have PTFE ball seats, EPDM seals, and with BSP female end connections.

Hidroten designed and manufacture custom mounting kits to enable the mounting of J+Jelectric actuators, with a wrap-around style kit up to 11/2", and a top mounted moulded bracket for 2" and above. 2 Way Hidroten PVC electrically actuated ball valves are available with full flow up to 3", the 4" valve is reduced bore.

J4C on-off electric actuators from the EU manufacturer J+J offer a single multi-voltage range from 24V to 240V, open/close operation with a local visual mechanical position indicator, space heater, end of travel confirmation switches, emergency hand operation, LED status light and external DIN plug connectors. Every Hidroten PVC electric ball valve is built and tested by All Valves.

Unsure of the suitability of PVC and either EPDM or Viton seals for your intended duty?  Check using our Chemical Compatibility Chart here.