Genebre pneumatic actuated butterfly valve, fully lugged WRAS approved ductile iron valve with AVP pneumatic actuator, built and tested by the valve actuation specialists, All Valves Online
Genebre 2108 pneumatic butterfly valve suitable for a wide range of general service duties, including drinking water , fitted with AVP pneumatic actuator, built and 100% bench function tested by valve actuation specialists in the valve actuation centre at All Valves Online.
Fully lugged and tapped butterfly valve suitable for end of line service and for mounting between BS4504 PN10/PN16 flanges up to 6" , larger sizes PN10, with GGG40 ductile iron body, CF8M stainless steel disc and EPDM liner, with anodised aluminium rack and pinion AVP pneumatic actuator.
AVP actuators are sized with 6 bar air available at the pneumatic actuator, if a lower air pressure is to be used, contact All Valves Online to check actuator sizing.
A full range of limit switch boxes, a namur solenoid valve range, valve positioners, air volume boosters, air filter regulators and more are available, visit the pneumatic accessories section here, or select popular accessories below.
| Type |
Pneumatically Actuated Plastic Ball Valve |
| Enclosure |
IP67 Plastic cover and base |
| Position Indicator |
Local position indicator as standard |
| Manual Override |
No |
| Valve Origin |
Spanish |
| Actuator Origin |
Turkish |
| Valve Material |
Cast Iron EN-GJS-400 (GGG-40) |
| Seats |
EPDM |
| Seal |
NBR |
| Assembled and Tested |
In House |
There are no associated accessories for this item.
| PDF | link | Technical Datasheet |
| IOM | link | Installation, Operation & Maintenance |
| CERT | link | Download product related Certification |
| 3D/2D | link | Download product related Certification |
There are no videos available for this item.
There are no associated spares for this item.