Global brand of thermoplastic valves - FIP quality, made in Italy
FIP VM Industrial Diaphragm Valve Series
The VM is particularly suitable for shutting of and regulating abrasive or dirty fluids and is equipped with a maintenance free single acting normally closed (diaphragm type) actuator. The valve can be installed in any position and the hand-wheel control and diaphragm seal, provide precise and effective control, while reducing the risk of water hammer to a minimum.
- The valve can be used with liquids and gaseous fluids, and is suitable for dirty or abrasive media
- The ’CDSA’ (Circular Diaphragm Sealing Area), in valves up to and including DN50, offers the following:
- Uniform distribution of the pressure of the compressor on to the diaphragm
- Reduction of up to 20% of the bolt tightening torque
- Reduced mechanical stress on the valve components.
- Easier internal cleaning
- Lower chance of accumulation of deposits and fluid contamination, reducing the possibility of damage caused by crystallisation
- Pressure rating: Maximum working pressure: up to 10 bar at 20°C (water)
- High Kv value and reduced pressure losses
- Modular range: 5 Actuator/Diaphragm sizes for 9 valve sizes
- Easy replacement of the sealing diaphragm
All Valves are now offering more than just the expected ball and butterfly valves as we move to become more and more of a one stop shop for all of your valve and process product requirements.
| Type | - |
| Code | VMDC090E |
| Size | 20mm |
| Material | CPVC |
| Seal | EPDM |
| Ends | Solvent Metric |
| Design | VMDC |
| Brand | FIP |
There are no associated accessories for this item.
| PDF | link | Technical Datasheet |
| IOM | link | Installation, Operation & Maintenance |
| CERT | link | Download product related Certification |
| 3D/2D | link | Download product related Certification |
There are no videos available for this item.
There are no associated spares for this item.