YT1000 Electro Pneumatic Positioner
YTC, a world leading brand of Pneumatic Actuator accessories. A Rotork brand offering Electro Pneumatic Positioners, Limit Switch Boxes, Volume Boosters and more.
YTC 1000R Series Pneumatic Valve Actuator Positioner
The YT-1000R provides electro-pneumatic modulation for rotary (1/4 turn) pneumatic actuators. Fed with a constant air supply to drive the unit (max 100 psi), the YT-1000R sets the position of the actuator relative to a 4-20mA DC input signal. Any change to the input signal results in a corresponding change to the actuator’s position. The YT-1000R offers fast and accurate response with low air consumption. An inlet air supply gauge is provided.
No output signal is provided.
ATEX
This explosion proof positioner is ATEX II 2G approved for use in Zone 1 applications (EEx md IIB T5). ATEX Certificate: KEMA 03ATEX 1195
Specifications:
Main air supply: 1.4 ~ 7 bar, 20~100 psi
Control signal: 4-20 mA DC
Impedance: Max 460 Ohm/ 20mA
Protection: IP 66
Linearity: ± 2% Full Scale
Hysteresis: 1% Full Scale
Sensitivity: ± 0.5% Full Scale
Repeatability: ± 0.5% Full Scale
Air consumption: 3 l/min @ 1.4 b supply
Flow capacity: 80 l/min @ 1.4 b supply
Housing: Aluminium
•
Can be used on single or double acting actuators
• Easy to install orifice plates can help reduce hunting in smaller actuators
• Zero resonance at 5~200Hz
• Simple conversion to reverse acting
• Simple zero and span adjustments
You can make your selection by selection the product you are interested in below. There you will be able to view data sheets, specifications and pricing with discount structure.
Please click on the product code for discounts, datasheets and more information:
Stock: = Available for next day delivery
= Available on 2-3 day delivery
= Factory lead time typically 7-10 days from your order.
General Note:
Please place your order by selecting the product listed above, this will show any discounts available whilst also showing you additional information including technical specifications and datasheets. From this screen you can add to basket also. Note that some products will be box quantities, this should be clearly shown on screen. If there is no box quantities stated, then all items are individually listed and priced. If the item you are interested is not showing as 'In Stock', please do contact us to check the best availability or allow us to offer an alternative/ like for like product. Products showing as '2-3 Days' might actually be available next day, please check with us before leaving the site. Goods showing as factory lead time or '7-10 Days' are typically from our European stocks and can often be made available on a shorter lead time for urgent requirements.